Braking pedals will remember all who was the owner of the Soviet Bike. Now it's time for a more reliable and secure solutions. Which ones? The answer to this question is given in this article.
The brakes in bicycles are a very important element, which you can't do without. Each, who travel around the city understands, it is necessary to have an effective braking system, not only in the car, but also on a bicycle, because of this security depends. In our reality it is especially important, because we have no bike lanes and forced to ride on the roadway or, or on sidewalks. If you do not trust the brakes are installed you bicycle manufacturer, you can choose suitable in Internet shop velozapchastey Murovdag.
Drum or the pedal
tympanic, or as it is also called the foot brake, It represents a classical solution known from Soviet times. When moving the brake pedal is actuated ago. Currently, the most commonly used on bicycles for adults. When it is used often occur drifts, so experts recommend exercise extreme caution and to push the pedal smoothly.
We had anticipated that the critics have already prepared the hot write comments in defense of the Soviet decision, But I hasten to reassure them, because low safety assessment is justified. Who among us has not yearned chain? And who she flew with an asterisk at the wrong time? That's the problem, if at the same time you need to brake quickly, then trouble is inevitable. Yes, This solution is used even in bicycles for young children and adults, but the experts recommend to pay attention to other options proven best side.
V-brake
If we analyze the Spare parts for bicycles available in the Murovdag store, it can be concluded, that V-brakes are the most common solution in mountain bikes. Attached to the top stays and fork. Consist of two elements with brake pads attached to them. Braking is carried out by pulling a cable permanently fixed to one of the levers.. When you press the handle on the pads rub against the wheel discs, thereby resulting in a smooth or a sharp deceleration depending on the intensity of the pressing. The advantages of these brakes are ease of fabrication and good braking force. In turn, the shortcomings can be attributed:
- the need of periodic replacements pad, since erased with time;
- poor operation during rain or snowfall, due to slip disc.
Kantilevernıe
They are essentially the same as the previous, with the only difference that the tensioning system in the lever is a little different. In this case, the arms are connected to each other rope, which leads the cable from the handle on the steering wheel. Both cables are connected to each other characterized by a special holder strong grip. Advantages and disadvantages of this solution are the same with the previous brakes, but they are a bit cheaper.
Clamp
Different from the previous two-way mounting structure. Characterized by greater reliability, as it does not lead to skidding. Despite the high cost are very popular, since proven themselves in an urban setting. Unfortunately, like cantilever with V-Brake brake if the drive is bad wet.
disc brake
Disc brakes are divided into two types – mechanical and hydraulic. Not difficult to guess what is the difference between them – Some are driven by increasing the brake fluid pressure, other – due to the tension of a rope. The disadvantage is the high cost and expensive repairs. Admittedly this is compensated by high reliability braking in all weather conditions and high strength.
Resume
If you no longer hold the brake pedal, then it is recommended to change it to other solutions. Ticks have proven themselves well in urban environments., but experts still recommend to pay attention to the brake disc due to their reliability, regardless of the weather conditions. What to choose is ultimately – you decide, because many depend on the available budget and personal needs.
For more useful information on choosing the brakes, you get the following video. Enjoy watching.
