Due to the compressed air can be independently and easily clean your computer of mechanical impurities. Remove dust without damaging the computer by other methods rather difficult. The use of compressed air saves time and reduces maintenance costs. However, you need to know how to choose and use compressed air.
What is cleaner for PK?
This metal can, resembling an aerosol can, wherein pressurized air. The pressure inside the balloon above atmospheric. By the cans are often attached handset, with which can be very accurately guide the air flow.
For that uses compressed air?
Fields of application of compressed air are varied. It is used in brake systems, the pneumatics, diving. In the case of computer equipment, compressed air used to clean the fan and the internal parts of computers. Due to the compressed air from the computer, you can remove dust and other contamination.
How to clean compressed air?
Before use, the compressed air must be disconnected from the power unit. Let it cool. Then you need to make the streets and blow by directing the air flow in such a way, all the dust particles have been thrown out of the case.
Many users are wondering how to blow a laptop or computer and often find conflicting information on the Internet. Therefore, to ensure maximum security equipment, should be guided solely by the advice of professionals.
note! Few people know, eg, that laptop or computer cleaning should not be performed during rainy or very humid weather. Ingress of moisture into the housing during cleaning can cause a short circuit and damage to the device after its assembly and including.
Compressed air must be sprayed in short bursts, and with the distance. The distance between the balloon and the device should be 15-20 cm. In the beginning, the fans should be cleaned, because there is going to most dust. During the purge should keep the rotors, so that the fan does not rotate too quickly and the bearing or the engine is not damaged.
Do not aim the compressed air directly on the rotating elements. After cleaning fan should proceed to a motherboard cleaning, and at the end of the housing interior. If the dirt is strongly adhered to the fans, it can be collected hygienic stick or a soft cloth, that does not leave fibers.
Can a compressed air damage your computer?
If compressed air is used improperly, this may result in damage to computer chips. Most often it occurs, when the air flow is directed directly onto the moving elements or too close to the.
It should also be properly direct the flow of air. Dust must not sit in the corners of the Deaf. Further it may lead to overheating of the device. Also, do not clean your computer, while it is still warm.
How to choose a compressed air?
Although the market can find a lot of different manufacturers, its manufacturing process is very similar. With a large choice of should give preference to the bank, which is attached to the tube. This will allow the compressed air to more accurately. Besides, air must be designed specifically for the electronics. It should not contain freon or other gases, but also be odorless.
