Simple tips on choosing a boat for fishing
First you need to determine the type of boat. Low-cost option would be rowing boat. Even the name of a small vessel clear, that move through the water, it can be, working with oars. The design of specific issues does not cause. Rowing boats are usually made in a closed or oval shape.
A more modern boat is a motor-rowing. The motor is mounted using a hinged transom. Such a vessel usually does not need a powerful engine. Since boats in most cases have a soft bottom, missing keel.
Motor models are in wide demand. The main feature of the vessels is the built-in transom. Easy to understand, that in front of you is a motor boat, due to its shape. It will somewhat resemble the letter "U". Usually, the models have a keel.
If you are interested boats in Minsk, pay attention to the assortment of the Unishop catalog. choosing, It is imperative to take into account the carrying capacity of the boat. This parameter is related to the capacity of the vessel. I.e, the higher the load capacity, the more capacity. If you are planning to go fishing alone, then this parameter is not particularly important to you.
It is advisable to choose a boat with a large number of air cylinders. If there are many of them, then the ship will be stable, even if there is a puncture. Of course, the puncture will make itself known in any case. But if you 5 cylinders, then you can easily reach the shore if damaged. 5 cylinders - this is usually the maximum.
If we talk about the material of manufacture, usually fishermen buy a PVC boat. This is where you find ease, and strength. In addition, salt water is not a problem for such models. PVC boats may have a reinforcing base. it, usually, or nylon, or polyester. Boats with a base will be more expensive, but the advantages of such models are more tangible. Vessels made of rubberized fabric are very inexpensive, but their service life is questionable.
note! When buying a PVC boat, pay attention to the seams. Soldered seams are much stronger than glued ones 0))glued seams - old joining technology, can “swim” from heating).
