Sometimes the washing machine starts to vibrate and jump for no apparent reason. usually the first, what users think, she's just unevenly worth. However, there may be another reason, поэтому без внимания этот факт оставлять нельзя. 
Why is the washing machine during the spin cycle jumps?
If the machine has just been installed, the, probably, not removed the transit bolts. It is simply eliminated, and not a cause for concern. But vibrations can talk about that, that any part unbalance in the washing machine.
troubleshooting
The first step is to find the cause of the problem, and best of all it can to make the expert, who knows all about the structure and functioning of the washing machine.
The reason for the shock absorbers: Repair or replacement
The main task of the oscillation damper is repayment, emerging techniques when working at high speeds. Since they begin to break down over time. If the machine is overloaded or regular washing is unevenly distributed, then this process is accelerated.
In addition to strong vibration equipment starts to publish characteristic sounds during the spin cycle, when defective dampers begin to beat on the body of the washing machine. With this problem you need to replace parts. Typically in the art, there are two damper, and the need to replace them both at once. This will ensure a uniform load. If you do otherwise, the old parts wear out quickly and then will need expert help.
The reason for mounting balances
The counterweight is a block, Vibration-damping and providing resistance art. Usually it is made of plastic and concrete. The latter type can collapse or crumble over time. But most begin with attachments counterweights problems. They start a little loose, pounding and vibrating. When repairs are carried out adjustment or replacement of a counterweight or for fastening bolts.
The problem with the bearings: how to replace
Bearings can quickly wear out or fail due to moisture. First, the washing machine starts to grind, and when severe failure occurs free lateral move with the drum shaft and a large vibration with wringer. Exploit this technique, you should not. In the event of total failure of the bearing during operation, its fragments cause enormous damage to other nodes in the art.
If this happened a nuisance, Bearing replacement is needed. This is a fairly complex process, because the need to disassemble the cabinet and the tank. So it's best call service, specializing in the repair of household appliances, and to cause the master on the house.
How to install a washing machine
For, to install this equipment correctly, you must follow certain steps:
- Removing transport parts;
- Choosing a location;
- installation of the prior art;
- Connection to the water supply and sanitation;
- Connection to the mains;
- work testing.
Details for the transportation needed, that the machine is not corrupted. To this end, bolts are used, staples and small bars. Their dismantling is important, because if you do not, then when the equipment could even break.
It is very important to choose the right place to install. Most often, the machine is set in the kitchen or bathroom, especially if the apartment is small-sized. It is also imperative to put it straight, Why use level. Downstairs there are special techniques are regulated by the support. In the new models, they have only front. In order to fix each leg at the desired height, you can use a special lock nut. It is important to clamp the well, to the washing technique is not vibrated.
Another major step is to connect the equipment to the sewerage and water supply. When there is a special tie-in to the apartment for the machine-Machine, you just need to connect it with running water using a special hose, that came. Besides, must be inserted into a special tee sewer special corrugated hose is.
If the washing machine is located in bathroom, where high humidity, the electrical connection requires a special approach. It is carried out either using a power strip, or by placing near a power outlet. In this case, the outlet is not standard, it should necessarily be equipped with a grounding terminal.
The last stage - a test run. And to perform it must be cautiously. This work does not include washing clothes. You only need to fill detergent and include washing mode. So you can not just check the work unit, but also clean it from the factory, and specks of dust. It is also important to pay attention to water bay, quickness and intensity of the heating. When, if the drain or spin properly implemented, it's okay.
