The main types of semi-industrial air conditioners

the, A pilot who needs air conditioning in the salesroom, store or other similar premises, It should get acquainted with their main types. This will help to choose for themselves the best solution. semiconductor conditioners, presented at http://mitsushito.com/shop/polupromyshlennye-kondicionery.html, They are divided into four main types, which will be discussed below.

channel device

This conditioner does not look good, but it does not matter, as it is designed to be installed in hidden places. for example, in areas under the ceiling. Ducted air-conditioners may have a much higher power, than the wall.

They suck the air from the room through the ventilation holes in the false ceiling, it is heated or cooled, and then fed through a respective inlet nozzle in the room. Their major advantage is that, that the air can hold the pipes in virtually any location, and the sound operation of such devices low.

However, Installation of this type of equipment is not always possible, and, Besides, required space for installation of ventilation ducts, serving for air distribution throughout the room. In terms of installation and maintenance, a simple solution is the cassette air conditioner.

Cassette conditioners

This type of device often can be found in offices and shops. Their installation is possible only in the event, if above the ceiling there is a suitable place to mount the indoor unit there. Cassette air conditioners require no ductwork, they relate only to the external hydraulic and electric actuators.

Some models also allow fresh air to be mixed with air, circulating in the hall. In this way, they also provide ventilation.

The only drawback of this solution is, it can be used not everywhere. However, There is a group of more universal models. They can be installed vertically on a wall or horizontally on the ceiling. This wall, ceiling air-conditioners.

Conditioners, wall, ceiling

To install this type of device does not require a false ceiling or additional ducts. Such conditioners can be attached directly to the ceiling - their design will not take useful space.

The second option is to mount on the wall close to the floor, eg, on the windowsill. In this case, it will be even easier to service, and the filter can be replaced even without the use of ladders. Wall, ceiling models are available in a wide power range, so choose the right air conditioner is always possible for yourself.

But what needs to be done, if you need a lot of air conditioning indoors and do not want to spoil the facade of the building with views of multiple outdoor units? In this case, they come to the aid of the model tower.

conditioners, tower

These devices are installed on the floor and have a large height. For their work need two holes with a larger diameter. One of them is necessary for sucking outside air, and the second - to display.

Unfortunately, because of, that the air conditioner includes a compressor, the noise in the room will be higher, than in the case of split units. However, there, where there is no possibility to install the outdoor unit, tower models without outdoor unit will be a godsend on hot days.

Rate article
IT News
Add a comment