Steering the car performs very important and directly affects driving safety. Regardless of the type of mechanical means of fault systems are very similar. pits, speed humps, bumps in the road cause rapid wear of components such as suspension and steering. What kind of trouble are the most common data elements and how to avoid them?
Repair of steering
Some damage can be corrected independently. These include:
- Replacement tips of steering drafts,
- Replacement of rubber protective mechanisms of rotation,
- failure associated with the hydraulic booster (refilling fluid into the reservoir, Belt tension adjustment pump or removing air from the system).
However, serious work, of dismantling, We must be conducted in a professional garages, one of which is Steering, For more information about it can be found on the website http://steering.ua/. Do not forget, that the right thing to do regeneration to restore full functionality of the device and allow to drive smoothly even thousands of kilometers.
What caused the steering gear wear?
The gearbox is subject to frequent shock loads, received from obstacles, encountered on the way. Especially devastating are factor assaults on irregularities, which are accompanied by rotating the wheel. In this way, any exit on the curb, even at low speed, It causes a lot of stress on the steering system.
A typical feature is the wear in the gearbox backlash, that is felt at the steering wheel. Sometimes when rotating the steering wheel or by uneven road you can hear the distinctive sound of.
Protection of steering
Even if the steering system is working flawlessly, sometimes you should look under the car and check the status of rubber anther. Often they are ground at the junction of metal clamps or just one drop. water, which as a result of falls in the steering mechanism, corrosive and, ultimately resulting in damage to the gearbox. The cost of these components is low, but their role is very important.
How to avoid the steering fault?
- First of all, should not drive on curbs. In this case, the port is not only steering, but tires. It is better to look for a place to park or walk an extra couple of meters.
- Nor can exaggerate the wheels with a rim size and tire width, which increase resistance.
- It is not recommended to turn the wheel at the time, when the vehicle is stationary.
- Sometimes fail materials, used in steering design, so it is better to give preference to the spare parts from reputable manufacturers.
