To date, almost every house and in every company using the device (Printer), which can print data from the PC onto the paper. Most often users buy MFP, t. it is. the combination of the printer with a scanner - products that can replace a simple photocopy. But the time or improper use leads to, that each technique fails. This article describes the most common faults, which occur in printers as well as their possible causes.
If after installing the cartridge, the printer does not print you should consider the following causes problems:
- incorrect connection between the printer – check the connection from the printer to the computer power jack.
- mistakenly installed the printer driver – make, that the device driver is installed correctly. For detailed instructions on installing the printer drivers can be found in the instructions to the printer or the device manufacturer's website
- not properly closed cover of the printer – check, to install a new printer cartridge cover is properly closed. You should also pay attention, the device does not display any error messages
- The printer is out of paper - check, so that the paper tray is not empty, and whether the paper is inserted correctly (it is best to remove all paper from the device, align and insert it into the tray again).
- toner or ink for your printer - check, the cartridge is not empty. To this end, better to revise the information in Device Manager.
- A paper jam in the printer – check, so that the printer does not remain pieces of paper. To remove this device from the cartridge, and make sure, that inside portions of the sheet is not visible.
- the printer is clean and maintenance-free - for a long-term operation inside the printer get these types of pollution such as dust, the remains of toner, paper or other debris. Over time, they can cause undesired operation, because they are deposited on the rollers or pins. disrupting the proper functioning of these elements. To solve this problem it is necessary to carry out regular maintenance of the device.
- all mechanical devices, including printer, sometimes exposed to failures, which are caused or long period of operation of the device, or external factors, such as power surges in the mains. In this case, the best solution is to communicate with the specialized site, who will diagnose the problem and estimate the cost to repair them.
