turbine (or compressor) - this device, that supports the operation of the internal combustion engine. This occurs due to the increase of air pressure, который принудительно подается в цилиндры. This, in turn,, impact on such elements, the efficiency of the unit (and its significant improvement), higher output, and consequently, not only optimizes but also reduces fuel consumption. For the first time turbocharging has been applied in 1983 year in trucks, and with 1973 It has been regularly used in passenger cars. Turbocharging system patented Swiss Alfred Buchi in 1905 year. install diesel engines in the new generation of cars turbocharger often, but not only. Naturally as well as any equipment turbochargers fail and need to be repaired. This article addresses the issue of: почему следует проводить turbine repairs именно в ДнепроТурбоСервис?
Regeneration
Regeneration of the turbine is not a simple task, but if it will damage this does not mean that it can not be corrected. Firstly turbine repairs требует надежных специалистов с опытом работы. Работа по починке состоит из нескольких этапов – чтобы заменить в ней неисправные элементы, first it must be thoroughly cleaned.
It often happens, что замена обходится намного дороже, than regeneration. Currently, the professional automotive services other than the provision of such services, as the repair or replacement of small elements are also involved in buying turbines. This leads to, that professional services are in its range a wide range of turbochargers, intended for regeneration. Regardless of the model or year of release, and the level of damage to the turbocharger, professional service will undertake the regeneration. And all because the recovery in most cases much cheaper than buying a new.
Why use the services of DneproTurboServis?
- Its experts know everything about the repair of turbines. Through years of experience the company is a reliable partner, when it comes to rebuilding turbochargers.
- The company always puts on a competitive but not in any way at the expense of quality. Therefore, always use high-quality parts from manufacturers such as: Mellet KODE, Motor sky, Garrett and Inter Cars, that is a guarantee of long-term work of any turbocharger.
- Компания бесплатно проведет проверку на работоспособность оборудования а в случае необходимости быстро проведет качественный Turbocharger overhaul.
The whole process of repair of turbochargers made in accordance with all procedures, set out in the maintenance manual manufacturer of these devices, taking into account the size of the tolerance of the mating parts. Therefore, the company experts use a valid professional toolset.
When the regeneration of these devices in service DneproTurboServis, employees perform the following actions:
- dismantle the unit into its component parts;
- отдельно тщательно промывают детали в ультразвуковом очистителе;
- considering the details of analyzing the causes of damage;
- test and evaluate the measurement point, specified by the manufacturer;
- change kit of parts from the repair kit;
- produce exactly balancing during rotation in the range of 0 to?? 250.000 revolutions / minute;
- sets a variable geometry turbocharger (if applicable);
- computer controller is adapted underpressure or overpressure;
- check operation of the stepper motor, Servo, electronically controlled;
- perform final assembly.
