Everyone who mowed rotary mowing on Tillers notice, when by chance “vrezheshsya” in the old mound, the walk-behind tractor stalls, because the bump is not cut off ,and the wheels are not about to slip, since the tread depth, To avoid this problem, you must upgrade the walk-behind tractor. How I did it read below. 
modernization motoblock
Features my motoblock
My FORTE HSD1G-81 bought with it in working order, the restoration took: times a week and about 6 thousand. gnr. to buy spare parts for walk-behind tractor. But the result has pleased, I would even say that it is not walk-behind tractor, and versatile garden tractor single axle, driven by diesel engines 9 HP. direct purpose – performing various works on the farm.
TECHNICAL SPECIFICATIONS
- ENGINE: water and air cooled. Power
9 HP. Start manual + self-starter - WEIGHT: 210 kg
- PROGRESS: 6 forward gears, 2 rear.
- FUEL: diesel fuel
It is the perfect device for most jobs, related to transportation on the farm, and to work in the garden. Walk-behind tractor used to transport the trailer, with attachments using cultivator, harrow, plow, motor pumps, a cleaner for cleaning the snow and of course mower, which emerged and some have difficulty.
Instructions for upgrading the walking tractor rotary mowers
To fix the problem glohnuvshego motoblock during haymaking instead of native wheels I put the wheel of the motorcycle, I bought them on the site https://sporte.com.ua/. Wheel secured to the pipe , a tube put on axis motoblock.
Council! That would not be tormented and look for the desired diameter of the tube is easier to order the turner to carve these adapters on the model factory for motoblock.
Replacing the wheels at the time of haymaking has several advantages.
- Motoblock stands above, hence the grass less often wound on a half.
- If you hit a bump in the wheel stalled and no walk-behind tractor stalls.
- Since fixing mowers rose, then he bent down to the ground and the stubble is lower to spit on 1,5-2 cm.
Lack also have, the pulley diameter needs to be reduced {stream} for the running belt on 5-7 mm., and then get performance, the operator will not have time to rearrange his feet.
All these settings motoblock I did for her FORTE HSD1G-81. Likewise can be done to any tillers. As a result of walking tractor refinement work it was easier. Wheels I did not take off until the end of haymaking.
_
