Laminated floor panels are gaining in popularity. It does not remain without attention to their low price and ease of installation. But not everyone knows how to stack. Below is a very simple solution for beginners.
high quality laminate can serve you for years. But it is important to its correct location. It is not difficult, but if you are a novice master lover, it is worth to buy several devices that will facilitate your work. If you do not have a desire to get yourself tools, you can use the services of companies, єsli you are interested in a professional laying laminate price work surprise you, ? to not expensive.
Since the installation of laminate flooring, First of all, necessary to get a good jigsaw connected to a vacuum cleaner for quick removal of dust produced during cutting laminated panels. You can buy it for little money or someone to borrow. Using the jigsaw will eliminate the need to purchase other tools, e.g. knives, etc.. d. In most cases, you can perform a jigsaw cut in each direction, longitudinal and transverse.
Of course, You can also use an ordinary saw, but remember that it is much more difficult to cut a perfectly straight line, and during the cutting process, a lot of dust and shavings. If you are working in a new apartment, for example with the newly painted walls, necessary to cut open air bar or purchase a jigsaw can be connected to a vacuum cleaner.
It happens that the walls in the apartment in which you work are not perfectly smooth. In this case, a goniometer and a pencil are used to determine irregularities and make further decisions on installation..
Note! Do not forget, that the installation of laminate panels need to leave a gap 10 mm between the laminate and the wall, the so-called heat-insulating joints,.
Also, to simplify the work of laying laminate flooring, you can use a special belt ties, mainly for use in large rooms. The fact that the compound of the laminate plates the slots can not connect to the end, forming a groove in size 1 or 2 mm. Of course, you can manually try to drive the plate in its place, but there is a possibility that you have not calculated the impact and damage the laminate. With access to the tape screed you will not be afraid of styling even in large rooms.
Placement of panels with the use of such instruments to avoid the problems associated with poorly cut into panels, dirt and dust. Thanks to them, you will lay the floor without loss of material. These "gadgets" greatly simplify your work. And do not hide, that the acceleration of the work associated with the installation of the floor will please everyone. If you want to put yourself laminate, then view the following video you will also be useful.
