cookery, baking or steaming create odors in the kitchen, indicating the full swing of work. However, If baking apple pie fills the house with a soothing aroma of tea in autumn day, smells of fried onions and potatoes do not have to get into the living room.
designation
extract indispensable in any kitchen. Regardless of, whether the kitchen is a small area or a spacious room, open to the living room, it must be equipped with a respective extractor performance.
odor absorber should be wider, what oven, on which it is located. It is also important the distance between the device and the plate. It should be at least 70 cm. However, you should not set it too high, because thus lost efficiency.
Extractor hood is installed on the kitchen stove or oven, to best get rid of the natural smells, arising during cooking and frying. Often it is additionally equipped with lighting, to facilitate work in the kitchen, and additional filters for air purification.
power calculation
When you purchase this device in the first place should pay attention to its performance. What does it mean? This amount of air, which can filter hood for one hour. The proposed models on the market, it is usually from 160 to 800 m3 / h. It's too big range, therefore, the right choice is very important hoods.
In the kitchen, the air must be filtered 6 every time. The easiest way to calculate the proper extraction capacity - is multiplied by the amount of space on 6. In this way, If the kitchen is the amount of space 40 m3, Optimum performance is 240 m3 / h.
If anyone has forgotten, room volume is calculated by multiplying the height of the area. Due to these parameters to acquire the right kitchen equipment becomes easier.
Attention! In modern homes are increasingly combined kitchen with living room. If between the two rooms there is no clear boundary, eg, walls, Power is calculated by multiplying 6 completely the total volume of the two rooms. Only in this case you can be sure, that the living room will not get the smell of roasting vegetables.
In this method of extraction is calculated minimum performance. No need to overdo it, because they are too powerful model will also be disadvantageous. That is why it is worth remembering, that maximum power is calculated by multiplying the cubic content on 12.
