If you are an iPhone owner 7, and you accidentally broke the glass, not worth much worry. Since to date to solve this problem is not difficult. In every city there are service centers, who are engaged in this kind of activity and can qualitatively replace old broke the glass on the new. It is worth noting, service centers that make such repairs within a relatively short period. Replacement glass may take a period of from several hours to several days.
That broken glass was the most common problem of iPhones. Though this service and it seems simple, but in fact the procedure is quite delicate and requires a high level of professionalism and experience of specialists. Also for glass replacement on the iPhone 7 special equipment is necessary to separate the glass from the display, as well as original accessories of high quality.
Replacing the glass on the iPhone 7 is required if, if your phone is dropped, or had a stroke, resulting in cracks and chips on the protective glass of the smartphone. But damaged glass must be exceptionally smart phone, and the picture should be clear, and the image to be transmitted in full, and the sensor should respond correctly to all press. If you have any of these problems, it is necessary to change the entire display module entirely. The display module consists of a display, sensor and protective glass.
Replacing the glass on the iPhone 7 It has done very carefully, Therefore, after the repair phone will look as good as new. This is achieved through the use of plywood factory technologies and high quality glass coated with oleophobic. Good service centers provide a guarantee on the work performed and parts of 6 to 12 months.
The procedure itself on the iPhone screen repair 7 It includes the replacement of the following components:
- directly to the protective glass;
- OKA film and the polarizing film, which serve as a layer between the touch screen and the protective glass, an inner layer forming the visible image;
- plastic frame, that secures the display, as the old frame often subject to deformation when removing broken glass.
Since the technology is rapidly evolving, screen replacement process is automated. Slice of broken glass produced using the separator machines, which minimizes damage to the various modules. Paste new glass with solid adhesive OKA, which allows you to remove blemishes and prevent yellowing and stains after a short time of operation. For bonding using a vacuum laminatorny repair complex, whereby sizing uniform and dense.
