fender, one of the most vulnerable parts. Damage can occur from anything: bad parking, tree branches, bushes. Scratches that occur in accidents, painting of the wing can be eliminated. wing painting автомобильного требует небольших практических умений и теоретических знаний.
Stages painting car wing
Before painting, the wing must estimate the size of damage. When shallow scratches painting automobile wing possible, but not required. Polishing for this will be enough. Before you begin painting the wing, you need to tidy up the place Painting, the vehicle it is necessary to wash and dry. Spray portion is glued film or paper. This will help prevent the ingress of ink droplets to other car sites.
Поэтапная покраска автомобильного крыла заключается в следующем:
- 1. Grinding required surface. Must be sanded to a matte surface. When rust, rust should be cleaned using abrasive paper with a recommended size P 120 - P 180.
- 2. Degreasing the surface to be painted with acetone. Dried primed surface immediately. Metal fast retesting corrosion. Soil prevents the emergence of malignant unnecessary rust.
- 3. Deep scratches need to be sure to carefully putty.
- 4. Painting of the wing.
Recommendations for the application of paint to the wing of any vehicle from professionals
Developing layer should be applied - the first, necessarily, a thin paint layer. The developing layer shows errors committed in the preparatory work. A layer does not require high quality, important to prevent sagging. Distance dyeing is 30 centimeters from the wing. Large distance will result in spray paint in the air.
The number of layers depends on your ability to paint and paint quality. Approaches between painting is 20 minutes. During this time, the paint time to dry. The ambient temperature in which the coating will occur must be 21-25 degrees. The color is best to choose special professional workshops, who have at their disposition the necessary special equipment. If a small area of paint is enough to have the desired paint code.