Polycarbonate canopy - reliable protection from rain and snow. Поликарбонат – это практичный, durable, easy care material. Finished products from it look aesthetically pleasing and modern.. To install it, you need to decide on the shape and material, from which the frame will be made.
canopy from polycarbonate Kharkiv Photo
canopy from polycarbonate Kharkiv Photo:
- canopy from polycarbonate Kharkiv Photo;
- canopy from polycarbonate Kharkiv Photo;
- canopy from polycarbonate Kharkiv Photo;
- canopy from polycarbonate Kharkiv Photo;
- canopy from polycarbonate Kharkiv Photo.
Заказать готовый навес в Харькове вы можете в компании Техно-Сталь, t: 063 032 7999.
note! canopy, canopy, canopy. The wood frame is considered the easiest to manufacture., as it does not require special tools and devices. But it is short lived. And yet the best option is a metal frame. It can be made of metal profile or be forged (the most expensive option).
canopy from polycarbonate Kharkiv Photo
Necessary tools for installation and installation of a canopy:
- drill;
- drill;
- drill;
- hammer;
- roulette;
- drill;
- welding machine (drill);
- level.
drill, drill. Before starting work, it is necessary to make a drawing of the future design, Before starting work, it is necessary to make a drawing of the future design, Before starting work, it is necessary to make a drawing of the future design, method of fastening the frame to the canopy and subsequently the finished structure to the building.
The frame mounting technology may vary depending on the type of material used for its manufacture.. The frame mounting technology may vary depending on the type of material used for its manufacture.:
- according to the drawing, it is necessary to prepare the frame parts and mark the attachment points on them;
- according to the drawing, it is necessary to prepare the frame parts and mark the attachment points on them, according to the drawing, it is necessary to prepare the frame parts and mark the attachment points on them, according to the drawing, it is necessary to prepare the frame parts and mark the attachment points on them, appropriate material;
- if necessary, the finished frame must be primed, clean the welds (if available) and paint.
canopy from polycarbonate Kharkiv Photo
Depending on the weight and volume, there are different methods of fixing it.. Depending on the weight and volume, there are different methods of fixing it. (Depending on the weight and volume, there are different methods of fixing it., Depending on the weight and volume, there are different methods of fixing it.) Depending on the weight and volume, there are different methods of fixing it.. Mounting points must be marked on the wall, Mounting points must be marked on the wall.
For installation of large structures (the roof of the gazebo, canopy in the yard of a private house) must first be set to a depth 0,6-0,8 m and pour concrete bearing vertical pillars-supports at a distance 0,7 m from each other. After that, m from each other, m from each other 1-3 day, m from each other.
Fixing the polycarbonate canopy on the frame is the final and no less important part of the installation.. The service life and strength of the entire structure depends on the correct work with polycarbonate.. The service life and strength of the entire structure depends on the correct work with polycarbonate.. After:
- close the ends of the sheets with a special sealing tape;
- fasten the sheets with a connecting profile;
- finish the finished canopy along the edge with end strips. This will protect against moisture ingress and give an aesthetic appearance to the finished canopy.;
- This will protect against moisture ingress and give an aesthetic appearance to the finished canopy., This will protect against moisture ingress and give an aesthetic appearance to the finished canopy..
You need to fasten the sheets with special washers with an external cover, to protect the attachment points from moisture.