Glue seamless photowall
Wallpapers every day are becoming more urgent as a wall covering, and it is only a matter of time, when you decide buy wallpapers. No matter what it wallpapers: Rolling, seamless, Paper or nonwoven, important to them pokleit. And today, the Ukrainian company, which produces non-woven Custom wallpapers higher Print, I decided to tell, how to make installation is seamless photowall.
Of course, before beginning basic training you need to choose wallpapers. Important, that they are safe, We have all quality certificates, so the best solution is to buy wallpapers from producer.
so, when you are convinced of the quality of your finishing material, You can proceed to the preparation of walls. First thing, necessary to remove from the walls of the previous coating, dirt and stains. The wall must be flat, so all the cracks and need to patch up uhabiny, evenly putty and primed deep penetration, which includes antiseptic. The walls should be no glass.
Remember! Application surface should be smooth, dry, durable, dust, fat and cracks. If wallpapers are glued onto the wet wall, then the risk will change the color of the peel and finishing material. Mounting seamless photowall should be conducted in a room with ambient temperature 18-25 °C. Also paste surface should be uniformly bright with strictly vertical angles. Ate you have no confidence, that all the angles precisely vertical, better to paste over each wall separately with a connection in the corners, rather than the entire room around the perimeter. It is also required to remove all the baseboards, plat, switches, sockets, window sills and doors, be no surface protrusions.
Of the tools you need:
- level,
- cutting tool,
- stiff brush,
- Roller glueing and smoothing,
- spatula and ruler.
The work should start from the point where it will be massive furniture. Apply the adhesive strips across the room height, The width of the line 2 m. Then attach the fabric to the wall. Press the wallpaper against the wall as closely as possible, and the top and bottom bars fix them with special. check every 2 m while the figure, Using a builder's level.
At the final stage cut hole openings of windows and doors. And only then remove the bars, when the material is almost dry, about a day.
