It's not a secret to anybody, that the durability of painted surface is dependent on the quality of its readiness prior to painting. Almost all manufacturers recommend that before applying the paint and enamel necessarily produce priming process.
Priming allows to create a protective layer on the material, which is due to deep penetration into the fabric structure, It gives it good adhesive properties, thereby improving its coupling with the subsequent layers of paint. Damage to the primer paint product will be firmly attached to the surface, It will not crack or flake off. Additionally the primer can align all irregularities coloring material, gloss over the cracks, promotes more even spreading and absorption paint.
What is a quick-drying primer?
Among all products primer, which is presented in a wide range of modern manufacturers, наибольшей востребованностью пользуется быстросохнущая грунтовка «Рапид Супер». Грунтовка представляет собой однокомпонентный состав, used for dyeing asphalt and concrete surfaces.
The composition provides filling of pinholes and cracks, It provides an excellent adhesion to the substrate and promotes hardening of concrete. It is also resistant to chemicals, moisture, acids, fats, alkalis. Excellent for use on open space, as the weather is not afraid of rain and ultraviolet radiation.
The polyurethane primer is characterized by ease of application and rapidity of drying. It is actively used as a primer for floors production halls, parking, flights of stairs, warehouses etc.. If necessary, the soil can be used as an independent protective coating.
More information on polyurethane primer available on the website of the company "Capital-Dnepr".
Tips for applying polyurethane primer
As with all paints, ground "Super Rapid" painted on an absolutely clean and dry surface. Before staining ground concrete well is cleaned from dust and dirt, completely degreased, and the composition is thoroughly mixed.
Apply the primer is necessary when using a roller or brush. When painting should pay particular attention to the uniformity of application of the composition, to avoid drips and puddles of Education. Staining should be carried out at an air temperature of no more than thirty degrees.
