Материнская плата 990FX Extreme6 основана на проекте игровой модели Fatal1ty 990FX Killer – в данном случае разработчики отказались от нескольких решений, dedicated to players. This design is compatible with AM3 + processors, and thanks to the use of an efficient power supply, it officially supports processors with TDP up to 220 VT (FX-9000). Four slots are allocated for RAM, which work with 2-channel DDR3 memory kits with up to 2450 MHz.
Expansion cards can be installed in three PCI-Express slots 2.0 x16 (electrically x16 / x16 / x4) and two PCI-Express 2.0 x1 – поэтому возможно подключение до трех видеокарт в режиме SLI или 3-way CrossFireX, but you need to connect additional power from the MOLEX plug. The disk is based on AMD 990FX and SB950 chipsets, which are responsible for the five SATA connectors 6 Gbps and one M.2 (2242 – 22110).
Also noteworthy is the PuritySound sound chip 2, which is based on the 8-channel Realtek ALC1150 codec.
ASRock 990FX Extreme6 Motherboard Specifications:
- format: ATX
- stand: AM3 +
- chipset: AMD 990FX, AMD SB950
- RAM: 4x DDR3 8 GB 2450 MHz
- connectors for expansion cards: 3x PCI-Express 2.0 x16, 2x PCI-Express 2.0 x1
- connectors for hard drives and drives: 5x SATA 6 Gb / s, M.2 (2242 – 22110)
- connectors on the rear panel:
- two PS / 2 ports
- six USB ports 2.0
- four USB ports 3.0
- eSATA connector
- RJ45 Gigabit Network Card Connector
- audio connectors 8-channel sound card Purity Sound 2 (together with optical S / PDIF)